The AGNEE Worm Gearboxeshave Cast Iron Gear Case of streamlined design completely air tight, dust proofand capable of being installed in open without any cover. The Worm Shaft ismade of Alloy Steel, duly hardened and tempered. The Worm Wheel is made ofChill Cast Phosphorous Bronze and teeth accurately Generated on Gear HobbingMachines. They are supported on Extra Heavy Duty Taper Roller anti frictionBearings of ample margin of safety to allow adequate journals as well as thrustloads. Lubrication is effected by splash of oil from the sump. Thus, no specialcare is required except for occasional oil topping to the required level. Aircooling is effected by means of standard polypropylene or metal fans. Pleaseread the for choosing the correct onefor your application. They are available in:

路        Vastrange of Models suit every individual's requirement

路        SomeModels like C.D. 50, 60, 75, 85, 100 mm, Ratio 30:1 or 40:1 are usuallyavailable Ex-stock or on short notice

路        CenterDistances from 40 mm to 400 mm

路        InSingle or Double Stage Reductions

路        Ratiosfrom 5:1 to 4900:1

路        Alsomade as per customer's specifications, Drawing, requirements

路        Overhaulingof Old Gear Boxes also undertaken, Early delivery schedules

路        AdaptableWorm Gear Boxes, range from CD 25mm to 85mm

Right angle worm gearboxescontain input shafts that are positioned perpendicular to the output shafts.Right angle worm gearbox have up to 98% efficiency levels, and are common inprinting presses and glass cutting equipment.